Cleaners

• Appearance: White powder
• pH of a 1% Solution: 11.5
• Bulk Density: 1.3 – 1.4g/cm3
• Freezing point: N/A

• Compatible with all types of ultra-filtration (UF) membranes
• Effective against biofilm
• Removes organics, proteins, oils and greases
• Removes particulates such as Silt and clay
• Cost effective low dose treatment

Genesol UF12 is an effervescent, alkaline, detergent, U.F. Membrane cleaner formulated with osmotic action to remove difficult biofouling, metals and organic deposits.

• Appearance: White powder
• pH of a 1% Solution: 2.0
• Bulk Density: 1.2 – 1.3g/cm3
• Freezing point: N/A

• Compatible with all types of ultra-filtration (UF) membranes
• Acidic pH cleaner to remove Iron fouling
• Synergized to boost efficiency
• Cost effective low dose treatment

Genesol UF Fe is a low pH cleaner formulated to remove Iron and Manganese fouling from Ultra-filtration membranes, especially in SWRO applications.

• Appearance: White powder
• pH of a 1% Solution: <2.0
• Bulk Density: 1.2 – 1.3g/cm3
• Freezing point: not applicable

• Suitable for reverse osmosis (RO), nano-filtration (NF) and ultra-filtration (UF) membranes
• Effective against inorganic scales
• Removes iron and calcium based deposits
• Effective against aluminium based foulants
• Cost effective low dose treatment

Genesol 721 is a low foaming, multicomponent, powder cleaner for membrane systems. It is designed to reduce differential pressure, increase flux and improve salt rejection. The blend of chelating acids removes oxides of iron and manganese plus calcium carbonate scale. It is also effective in removing other metallic foulants such as aluminium.

• Appearance: pale liquid
• pH as supplied: 12.0 – 13.0
• Specific gravity: 1.1 – 1.3
• Freezing point: -3°C

• Suitable for use in RO and NF membranes
• Effectively removes existing biofilm
• Inhibits biofilm development on membrane surface
• Compatible with polyamide membranes

Genesol 80 is a membrane cleaner for use in reverse osmosis (RO), Nanofiltration (NF) and Ultrafiltration (UF) membrane systems. Genesol 80 targets biofilm which predominantly consists of a glycocalyx layer of extracellular polysaccharide materials secreted by bacteria under stress.

• Appearance: pale liquid
• pH as supplied: 7.0 – 7.8
• Specific gravity: 1.09 – 1.12
• Freezing point: -3°C

• Gentle neutral pH cleaner less aggressive to membrane surfaces
• Compatible with all membrane materials
• Effective against organic deposits including biofilm
• Removes iron and calcium based deposits
• Removes clay and colloidal compounds
• No neutralization required
• Cost effective low dose treatment

Genesol UF 7 is a neutral pH cleaner ideally suited for the removal of organic & inorganic foulants from Ultra-filtration membranes, particularly where the use of low & high pH cleaners may be limited due to Health and Safety or effluent disposal restrictions.

• Appearance: Colourless to pale liquid
• pH as supplied: 11.0 - 11.5
• Specific gravity: 1.33 - 1.35
• Freezing point: - 0°C

• Suitable for use in Reverse Osmosis (RO) and NanoFiltration (NF) membranes
• Effective against both organic and inorganic deposits
• Effective against calcium sulphate
• Compatible with all polyamide membranes
• Can be used in combination with other Genesol cleaners
• Classified as ‘readily biodegradable’

Genesol 34 is a blended chelating agent and non-ionic surfactant and has been developed as an alkaline general purpose cleaner for membrane systems.

Genesol 34 will help to remove both organic and inorganic based deposits.

Genesol 34 is classified as ‘readily biodegradable’ and is an excellent adjunct when used in combination with other Genesol membrane cleaners

• Appearance: pale yellow liquid
• pH as supplied: 7.0 - 9.0
• Specific gravity: 1.01 - 1.05
• Freezing point: -5°C

• Suitable for use in Reverse Osmosis (RO) and NanoFiltration (NF) membranes
• Effective against organic deposits
• Compatible with all polyamide membranes
• Approved for use in potable water applications
• Liquid product, easy to use
• Can be used in combination with other Genesol cleaners
• Cost effective low dose treatment

Genesol 36 is a general purpose cleaner for the removal of organic foulants found on Reverse Osmosis and Nanofiltration membrane surfaces.

The low dose rate of Genesol 36 ensures cost effective use and it is an excellent adjunct when used in combination with other Genesol membrane cleaners.

• Appearance: pale liquid
• pH as supplied: <1
• Specific gravity: 1.30 - 1.34
• Freezing point: - 5°C

• Compatible with Reverse Osmosis (RO) and Nanofiltration (NF) membranes
• Effective against inorganic scale and iron deposits
• Effective against proteinous deposits
• Wide application of use including the food process industry
• Liquid product, easy to use
• Low dose rate ensures cost effective treatment

Genesol 37 has been developed as a general-purpose cleaner for inorganic scale and iron deposits found in most types of membrane system. It is also highly effective at removing organic deposits from severely fouled systems.

• Appearance: colourless liquid
• pH as supplied: 3.5 – 4.0
• Specific gravity: 1.17 - 1.20
• Freezing point: - 0°C

• Suitable for use in Reverse Osmosis (RO) and NanoFiltration (NF) membranes
• Effective against inorganic deposits
• Preferred product for removing iron deposits
• Self adjusting pH ensures optimum solubility of iron salts
• Approved for use in drinking water applications (UKDWI)
• Compatible with both polyamide and cellulose acetate membranes
• Effective against aluminium based foulants
• NSF listed

Genesol 38 has been developed as an inorganic scale cleaner and iron deposit remover for use in Reverse Osmosis and Nano-filtration membrane systems.

Used at the right concentration, its selfadjusting pH ensures highest solubility of iron salts is achieved.

Genesol 38 has been approved for use in drinking water applications.

• Appearance: pale liquid
• pH as supplied: > 13.0
• Specific gravity: 1.12 - 1.24
• Freezing point: - 0°C

• Suitable for use in Reverse Osmosis (RO) and NanoFiltration (NF) membranes
• Effective against a wide range of organic foulants
• Approved for use in drinking water applications (UKDWI)
• Liquid product, easy to use
• Efficacy against clay and colloidal silica fouling
• NSF listed

Genesol 40 has been developed as a general-purpose membrane cleaner effective against organic based foulants typically found in Reverse Osmosis and Nano-filtration membrane systems.

Genesol 40 has been approved for use in drinking water applications.

• Appearance: pale yellow liquid
• pH as supplied: 13.0
• Specific gravity: 1.29 - 1.31
• Freezing point: -0°C

• Suitable for use in Reverse Osmosis (RO) and NanoFiltration (NF) membranes
• Effective against a wide range of organic foulants
• Effective against iron fouling and inorganic based deposits
• Used in a wide range of applications
• Can be used in combination with other Genesol cleaners
• Liquid product, easy to use

Genesol 50 is based on a chelating agent and has been developed as a generalpurpose membrane alkaline cleaner for use with Reverse Osmosis and Nanofiltration membranes.

Genesol 50 will remove organic and inorganic based deposits. It is effective against iron fouling and many forms of calcium scale and is an excellent adjunct when used in combination with other Genesol membrane cleaners.

• Appearance: white powder
• pH of a 1% solution: 11.5 -12.5
• Bulk density: 1.3 - 1.4
• Freezing point: not applicable

• Suitable for use in Reverse Osmosis (RO) and NanoFiltration (NF) membranes
• Removes most organic and inorganic deposits
• Cost effective powdered product
• Compatible with all polyamide membranes
• Removes aluminium silicate
• Excellent for alkaline prewash
• NSF listed

Genesol 703 has been developed as a general-purpose membrane cleaner for an extensive range of organic based foulants found in Reverse Osmosis and Nano-filtration membrane systems.

Genesol 703 is particularly effective against aluminium silicate, which can be difficult to remove with conventional cleaners.

• Appearance: white powder
• pH of a 1% solution: ~12
• Bulk density: ~1.3 - 1.4 g/cm2
• Freezing point: not applicable

• Suitable for use in Reverse Osmosis (RO) and NanoFiltration (NF) membranes
• Removes most organic deposits
• Cost effective powdered product
• Compatible with all polyamide membranes
• Removes aluminium silicate
• NSF listed

Genesol 704 has been developed as a general-purpose cleaner for a wide range of organic based foulants found in Reverse Osmosis and Nano-filtration membrane systems.

Genesol 704 is particularly effective against aluminium silicate, which can be difficult to remove with conventional cleaners.

• Appearance: white powder
• pH of a 1% solution: ~10.5 - 11.5
• Bulk density: ~1.10 - 1.30g/cm2
• Freezing point: not applicable

• Suitable for use in Reverse Osmosis (RO) and NanoFiltration (NF) membranes
• Removes most organic deposits
• Cost effective powdered product
• Compatible with all polyamide membranes
• Removes clay (aluminium silicate)
• NSF listed
• Non - hazardous for transport

Genesol 734 has been developed as a general-purpose cleaner for a wide range of organic based foulants found in Reverse Osmosis and Nano-filtration membrane systems.

Genesol 734 is particularly effective against clay (aluminium silicate), which can be difficult to remove with conventional cleaners.

UF and MF units can also benefit from speciality cleaning alongside chemically enhaced backwashes.

• Appearance: white powder
• pH of a 1% solution: ~10.5 - 11.5
• Bulk density: ~1.10 - 1.30g/cm2
• Freezing point: not applicable

• Suitable for use in Reverse Osmosis (RO) and NanoFiltration (NF) membranes
• Removes most organic deposits
• Cost effective powdered product
• Compatible with all polyamide membranes
• Removes aluminium silicate
• NSF listed
• EDTA free
• Classified as non hazardous for transport

Genesol 764 has been developed as a general-purpose cleaner for a wide range of organic based foulants found in Reverse Osmosis and Nano-filtration membrane systems.

This formulation contains a high performing environmentally friendly chelant replacing EDTA.

Genesol 764 is particularly effective against clay (aluminium silicate), which can be difficult to remove with conventional cleaners, it is also effective in cleaning Ultra-Filtration & MicroFiltration systems.