Specification: Material Body Section ABS resin Film Section The plastic synthetic resin Standard Ventilation Volume 100 l/min~450 l/min Weight 130g Installation Method Either upward or downward Connection Method PT1B thread Specification of ABS: Test item Figure Test Method(JIS) Tensile Strength 480kg.cm/cm2 ASTMD638 Expandability 20% ASTMD638 Bending Strength 710kg.cm/cm2 ASTMD790 Bending Elasticity Rate 25,200kg.cm/cm2 ASTMD790
Specification:
| Material | Body Section | ABS resin |
|---|---|---|
| Film Section | The plastic synthetic resin | |
| Standard Ventilation Volume | 100 l/min~450 l/min | |
| Weight | 130g | |
| Installation Method | Either upward or downward | |
| Connection Method | PT1B thread | |
Specification of ABS:
| Test item | Figure | Test Method(JIS) |
|---|---|---|
| Tensile Strength | 480kg.cm/cm2 | ASTMD638 |
| Expandability | 20% | ASTMD638 |
| Bending Strength | 710kg.cm/cm2 | ASTMD790 |
| Bending Elasticity Rate | 25,200kg.cm/cm2 | ASTMD790 |
| Impact Strength | 15kg.cm/cm2 | ASTMD256 |
| Heating Deformation Temperature | 82oC 6.4mm 87oC 12.7mm |
ASTMD648 |
| Softening Point | 107oC | ASTMD1525 |
| Dissolution flows | 15g/10mm | JISK7210 |
| Specific Gravity | 1.05 | JISK7112 |
Thermoplastic Synthetic Resin Property List:
| Test item | Figure | Test Method(JIS) | |
| Hardness | 70 | K6301 | |
|---|---|---|---|
| Compression Permanent Bevel Rate | 47% | K6301 | |
| Tensile Strength Test | Tensile Strength | 1.5kg.cm/cm3 | K6723 |
| Expandability | 260% | K6723 | |
| 100%M | 0.59kg.cm/cm3 | K6723 | |
| Heating and Aging Test | Tensile Strength Rate | 99% | K6723 |
| Expandability Rate | 100% | K6723 | |
| 100%M Rate | 98% | K6723 | |
| Evaporation Reduction | 0% | K6723 | |
| Oil Resistance- #2 Insulating Oil | Tensile Strength Rate | 99% | K6723 |
| Expandability Rate | 100% | K6723 | |
| Coldness Resistance | -36 oC | K6723 | |
| Heating Deformation Rate | 7% | K6723 | |
| Specific Gravity | 1.30 | K7112 | |