Household & Commercial Water Purifier
Filtration Media & Chemicals
Pump & Blower
Accessories
By Brand
Oxalic acid based U.F. Membrane Cleaner Removes Iron and Manganese Deposits Genesol UF Fe is a low pH cleaner formulated to remove Iron and Manganese fouling from Ultra-filtration membranes, especially in SWRO applications. Typical properties Appearance: White powder pH of a 1% Solution: 2.0 Bulk Density: 1.2 – 1.3g/cm3 Freezing point: N/A
Genesol UF FE Membrane Cleaner Chemicals By Genesys Metallic coagulants are often used in the pre-treatment of Seawater & Brackish Water Reverse Osmosis systems to improve filtration efficiency. However, the coagulants themselves can foul UF membranes causing decrease in performance. In addition, iron corrosion products and naturally occurring feed water iron cause UF membrane fouling. Membrane manufacturers recommend Oxalic acid for the removal of Iron and Manganese deposits from UF membranes, Genesys has formulated UF Fe based on a synergistic blend of Oxalic and other chelating acids including an Osmotic effect cleaner to enhance foulant removal.
Application
Genesol UF Fe should be used as a 1% - 2% solution v/v of CIP solution and should be alternately soaked and recycled through the membrane system for 3-4 hours depending on the level of fouling. Genesol UF Fe will clean effectively at ambient temperature. For heavily fouled systems the cleaning period can be extended, including overnight soaking. For a detailed cleaning programme please contact Genesys International ltd. After cleaning, the membrane system should be thoroughly flushed
with permeate. Genesol UF Fe is readily soluble in Permeate water. Health and Safety Low pH solutions are corrosive against carbon steels and concrete so pumping equipment, piping and storage tanks must be constructed of acid-resistant materials. Observe all safety precautions detailed in the Material Safety Data Sheet which is available upon request.
Packaging
Available in 25 kg Pails and 1,000 Kg Bulk Bags. The shelf life of Genesol UF Fe is 2 years under normal conditions.
Ensure the packaging remains sealed and the Genesol UF Fe remains dry.
✓ Compatible with all types of ultra-filtration (UF) membranes
✓ Acidic pH cleaner to remove Iron fouling
✓ Synergized to boost efficiency
✓ Cost effective low dose treatment
Typical properties
Appearance: White powder
pH of a 1% Solution: 2.0
Bulk Density: 1.2 – 1.3g/cm3
Freezing point: N/A
Genesol UF FE Membrane Cleaner Chemicals By Genesys
The information provided in this data sheet is believed to be true and accurate. Genesys International Ltd. accepts no product liability as the use of its products are outside the company’s control.
(0)
Login To Leave Review
HI-CARB is a medium activity granular activated carbon manufactured from a sustainable raw material source. Its enhanced...
Birm Media is most effective and cost-effective iron removal filter media. It is producing in USA factory. This Birm Med...